Repairing Your Xbox 360 Do it Yourself

Repairing your Xbox 360 is really not that hard if youcareful not to break them.
own some basic tools and have a little patience. FirstYou will now be able to see the metal chassis inside.
of all let me say if you Xbox 360 is still under warrantyYou can now remove the bottom of your Xbox 360.
do not open the unit up. You will void your warranty.Apply gentle pressure with a flathead screwdriver to
There is nothing worse than buying the latest gamerelease the tabs on the front and back. You'll need to
and not being able to play it. If your Xbox has stoppedinsert the screwdriver between the white panels to
working. You can send it back to Microsoft and waitdetach the back tabs.
forever or you can learn how to maintain and repairYou can now remove the top portion. At this point you
your own Xbox 360. Internally it is very similar to yourwill need a torx screwdriver. If you do not have one
home computer.you can buy a cheap set at your local hardware store.
The first step in repairing your Xbox 360 is getting itDo not try to use a regular flat head or Phillips, you will
open without damaging the case. First you will want todamage the torx screws.
lay out a soft towel or blanket on your work surface.Remove the 6 torx screws located near the four
Next you need to remove the faceplate. There arecorners and center of the chassis. Remember where
latches on the ends of the faceplate internally. Youthe longer ones came from.
cannot see them from the outside. Laying your XboxAt this point you can lift out the DVD unit and you will
flat, squeeze the ends of your face plate and pullfind the CPU underneath. You now have access to
forward. It will pop off.repair your Xbox 360.
Once the faceplate has been removed, you canOne of the most common problems is with the DVD
remove the side panels. To release the tabs, insert aunit. This is an easy fix and there is no need to pay
thin, round screwdriver or punch into the holes on eithersomeone else to repair it.
end of the white case panels and gently push. Be